Ghost Immobiliser Fitting
Guard your vehicle against key theft, cloning, and hacking with the first aftermarket CAN-Immobiliser. The Ghost app and GPS tracking can be connected to the immobiliser, which will send you alerts when your vehicle is taken or damaged.
The installation of a Ghost immobiliser can be completed by a certified technician. It is important to have the proper equipment and heat shrink tubing.
Getting Started
Unlike physical theft protection devices like wheel locks and car alarms, ghost immobilisers protect your vehicle without the need of LEDs or key fobs. They are directly connected to the ECU CAN data network and are activated only by entering a PIN code. This gives a more secure level of protection against key hacking, cloning and even ECU swapping.
Installing a ghost immobiliser Birmingham requires a certain amount of agility and precision. It's like navigating the minefield. A single mistake could cause irreparable damage to the circuits of the electrical system of your vehicle. It is essential to comprehend the procedure for installing and prepare your vehicle in a timely manner.
It is necessary to remove interior panels from the vehicle in order to make room for the immobiliser. Once you have found the ideal place to hide it and you have it, use cable ties to fix it. Then, clean up the wiring by tying down loose wires, and then using insulation tape or heat shrink tubing to cover the exposed connections. This will help to minimize the risk of short circuits that are not intended to be there while also improving the aesthetics and decreasing the possibility of tampering with by thieves.
Finally, identify the source of constant 12V power and a grounding location for the ghost immobiliser. Once you've located these connections, test the power cables with a multimeter to make sure they're delivering a consistent voltage. Connect the CAN H and L wires from the immobiliser to the identified power source and the grounding point.
Once you've made all of the connections required, it's important to double-check the connections and examine the immobiliser for indications of corrosion or damage. It is also important to test the system to make sure it is working properly by entering a pin code and then starting the engine. This should be a regular part of your routine, since it can help you spot any intermittent issues early. Regular testing can help increase the longevity of your device and ensure it is running at its peak.
Preparing the vehicle
Installing a Ghost immobiliser is a process that requires skills and knowledge. A wiring diagram of the vehicle is crucial to identify the proper wires and establishing precise connections. A multimeter is a great tool to check electrical values and ensure safety. Insulation tape and cable ties can be used to protect the connections from damage and keep them secured. Finally, a user manual will provide specific guidance specific to the Ghost Immobiliser model you have.
Once installed, a ghost immobiliser is able to prevent unauthorised engine start by requiring the owner to enter a unique PIN sequence using buttons on the steering wheel or on the centre console. This can be accomplished manually or remotely through an app for mobile phones, and the code is able to be modified by the vehicle's owner at any time. The device also operates silently and is undetectable to thieves because it doesn't emit radio frequency.
A ghost immobiliser is directly connected to the CAN bus of the vehicle, a network that communicates with the electronic control units (ECUs) of the vehicle. It intercepts the signals transmitted by ECUs, and blocks the engine when a false signal is identified. The system is tamper-proof and weatherproof, but it does not have key fobs or LED indicators to draw the attention of thieves.
It can be positioned behind or in a less noticeable area so that it's not easily spotted by thieves and does not interfere with vehicle performance. It could even be placed in a small container, making it less likely to be discovered during a test drive by unscrupulous salespeople selling cars.
Its low-profile operation and integration with the vehicle's CAN bus network make it a formidable deterrent to modern methods of theft, including key cloning and signal relay attacks. The system can be combined with other security measures to create a formidable barrier that will frustrate even the most persistent thieves. This is why more insurance companies are now suggesting or even requiring ghost immobilisers to be installed, as it can significantly reduce monthly premiums.
Making the Connections
Unlike traditional security systems that are heard by thieves, ghost immobilisers operate in a quiet manner to stop them from knowing that your vehicle has been turned on. They also stop the high-tech methods used to steal vehicles, like OBD port hacking. Installing them without leaving permanent marks on your vehicle is a great alternative for those planning to sell their vehicle in the near-future.
The Autowatch Ghost 2 is a immobiliser CANbus that is among the most reliable and modern solutions to protect your car from theft. It shuts down your engine by using the CAN data network and generates a unique PIN number that is difficult for criminals. It can be fitted in many vehicles and integrates with a number of features already in place, such as car alarms and GPS trackers, steering wheel locks, and door lock bypass systems.
If you opt to use an Ghost immobiliser for your vehicle, be sure to consult the wiring diagram to identify the wires to connect. Verify their positions to ensure they're correct, and then label them or tape them to help remember them. It is also necessary to locate a reliable power source (12V) for the system and an earthing. Once you have the necessary components, you can begin making connections to complete the installation.
If the ghost immobiliser has been connected to your CAN bus, it will prevent your vehicle from starting until you enter a pin code through the buttons on the dashboard or steering wheel. This will stop ECU cloning as well as other methods of vehicle theft. It can also be paired with other Thatcham approved security devices like alarms or tyre clips to provide your vehicle with an even greater security level.
As the UK automotive industry continues to expand, and so do the options for protecting your car. With so many ways for thieves to get in and steal your vehicle it's essential to do everything you can to ensure it isn't taken away. That's why ghost immobilisers are very popular among responsible car owners.
Testing the System
The Ghost Immobiliser communicates with the vehicle's ECU using a CAN network. This prevents the engine from starting until a PIN code has been entered. This makes it extremely difficult for thieves to copy your key fob and start your car, and more difficult to disable the system by hacking into its electronics.
Ghost Immobilisers can also be used together with GPS tracking devices that can assist you in tracking your vehicle and track it in the event of theft. This isn't an everyday feature in security products that are available from the market however it's a great method to enhance your security and get peace of mind knowing your vehicle is protected.
The Ghost-II immobiliser not only provides enhanced security but also a pleasant experience for the user, by not having to use additional key fobs or devices. It has an easy and simple PIN code entry system that is seamlessly integrated into your daily routine. Additionally, it provides deactivation modes and convenience features that let you temporarily disable the immobiliser to allow valet parking and servicing.
Prepare the necessary tools and become familiar with the wiring of your vehicle. A basic set of hand tools will allow you the ability to make precise connections while a multimeter will help verify electrical values. Insulation tape and heat-shrink tubing are essential to protect connections from short circuits. Cable ties can be used to secure wiring. It is also essential to work in a well-lit location and wear safety gear when working with electrical tools and components.
You should test the Ghost immobiliser once you have completed the installation to make sure it's working correctly. First, you should try to start the vehicle without entering the PIN code. If this fails, you'll have to retest the system and conduct a thorough examination of the connections.
The Ghost Immobiliser, unlike other security systems, is a secret device which cannot be recognized by thieves. It is also more efficient than physical deterrents, such as wheel clamps and steering locks. It is TASSA recognized and approved by a few insurance companies, which makes it an investment that is cost-effective and will provide you with the peace of mind you deserve.